Halverson CTS
  • Welding Outline
  • Welding Safety Electric Shock
    • Welding Safety Fumes & Gases
    • Welding Safety Fire and Explosions
    • Welding Safety Personal Protective Equipment
  • Welding Safety Document
    • Hand Tools
  • Chapter 14 Oxyfuel Gas Cutting
    • 14.1 The Heat of Combustion of Steel
    • 14.3 Cutting Outfit
    • 14.5 Using a Cutting Torch
    • 14.6 Cutting Steel with the Oxyfuel Gas Cutting Torch
    • 14.7 Cutting Alloy Steels
    • 14.9 Automatic Cutting
    • 14.10 Safety in Oxyfuel Gas Cutting
  • Test

​3.6 Review of Welding Symbols

Picture
Figure 3-43. Examples of various types of welds in various positions.

Figure 3-43 shows examples of various welds and positions of welding. The ability to visualize the resulting weldment after reading the welding symbol is a very important skill for the welder to master. If you are not sure of the information given on the welding symbol or the location of needed information on the symbol, go back over this chapter.

​Reviewing this chapter periodically as you move through the material covered in this book will help build your print-reading confidence. You may also wish to refer to ANSI/AWS A2.4, Standard Symbols for Welding, Brazing, and Nondestructive Examination.
Picture
Keep Calm and Shoot On

Halverson Photo 1.0